7
3.1.1.
Switch
Changing from one setting to another resets the measurement mode. Around the switch, a fixed orange LED
indicates which function is selected and an orange LED flashes for setup. During the charging cycle (OFF),
each function LED lights by turns to indicate charging in progress.
In the centre, a "4 position" navigator is used for:
1.
navigating up and down, to:
-
select a menu or a function,
-
manually select the range or graphic scale under " ",
-
increment or decrement the selected variable.
2.
navigating right and left, to:
-
move from one selected variable to another
Short press
Successive short presses or selection by
F1, F2, F3, or F4
AC, DC or AC+DC RMS current measurement
Temperature measurement T and selection of
the unit (°C, °F, K)
Selection of the types of sensor:
-
Pt 100 or Pt 1000
-
TCJ or TCK
Capacitance measurement
Current measurement by clamp, selection of
AC, DC, or AC+DC coupling
Configuration
of
the
"Clamp"
menu:
type of measurement, ratio, and unit
Resistance measurement, audible continuity
measurement, 100 Ohm range, diode test
Selection of the continuity, 100Ohm or
diodes functions
Frequency measurement
AC voltage measurement (AC RMS) and
selection of coupling
AC, DC, AC+DC, VlowZ
SETUP, on 3 levels
Setup 1/3, Setup 2/3, Setup 3/3
Summary of Contents for Metrix MTX 3292B
Page 54: ...54...
Page 55: ...55 X04854A02 Ed 01 02 2019...
