21
Look-up of the recorded files under [F1] Files and selection by the navigator, then
possibility:
-
of opening the selected sequence [F1],
-
of deleting a selected sequence [F2],
-
of deleting all recorded sequences [F3]
-
Select the Files menu in the MEM function to display the list of successive records.
Each record is identified by its date, its start time, and the name entered by the user.
The selection of a record is accompanied:
-
by the number of values recorded,
-
by the recording interval
-
by the function in which they were made,
-
by the secondary functions present during the recording, if any.
The number of recording sequences is limited to 10 or 30 depending on the version of the
instrument.
Programming the number of records
Defining a number of records for a measurement campaign makes it possible to stop
recording automatically.
Selection of the max number of records using the navigator
(30,000 or 10,000 measurements
max.); as default [F2], 10,000 records
If
MEAS+, SURV
,
or
REL
secondary measurements are programmed on 3293, it will be
necessary to make allowance for them in the depth of recording selected.
-
Programming the recording frequency
-
Selection of the digit to be modified by the navigator key.
-
Modification of the value by the keys:
Validation of the number of records by
Ok
[F1]
Validating
Freq.
by the [F3] key opens a menu for adjustment of the recording interval in
hours, minutes, seconds
-
Modification of the value using the keys of the navigator
-
Validation of the interval of recording of the measurements and exit from the
successive menus by the Ok key [F1].
The recording rate is from every 0.3s to 23h, 59min, 59s.
Default recording interval 1s.
Recall of a recording campaign
The curve displayed is adapted to the graphic window according to its min. and max. values
and the number of records.
Selection of the Main function, by default, and display with Cursor selected.
Displacement of the cursor by the navigator
-
moves the zoomed part (icon present, if a zoom is active)
-
activates, deactivates a zoom (icon present, if a zoom is possible)
Zoom of the trace by selection of the zone in red border in the upper part of the
record
But access to the secondary measurements to be displayed by pressing
TRACE, then selection by keys [F2] to [F4],
Selection of the function to be displayed
Example :
-
Main function :
V
-
Secondary function
: FREQ
,
dB
,
MATH
Summary of Contents for Metrix MTX 3292B
Page 54: ...54...
Page 55: ...55 X04854A02 Ed 01 02 2019...
