Chattanooga Intelect Mobile 2 Ultrasound, Quick Start Manual

Page: 30 / 482

30
INTELECT® MOBILE 2 QUICK START GUIDE
WAVEFORMS (CONTINUED)
Isoplanar Vector Interferential Current
Interferential Current is a medium frequency waveform. Current is
distributed through two channels (four electrodes). The currents
cross each other in the body at the area requiring treatment. The
two currents interfere with each other at this crossing point,
resulting in a modulation of the intensity (the current intensity
increases and decreases at a regular frequency). In Isoplanar
Vector IFC Channel B has a fixed phase shift of 45° against Channel
A.
Output Mode Electrodes
Available on Channel 1&2
Treatment Time 1-60 Minutes
Amplitude 0-100 mA (CC)
Beat Frequency 1-200 Hz
Carrier Frequency 2000-10,000 Hz
Cycle Time Continuous or User Defined
Ramp 0-5 s
Sweep Time 14 sec
Sweep Low Beat Frequency 1-199 Hz
Sweep High Beat Frequency 2-200 Hz
Vector Scan Fixed at 45°
IRMS 0-55mA
DC component
No
Dipole Vector Interferential Current
Interferential Current is a medium frequency waveform. Current is
distributed through two channels (four electrodes). The currents
cross each other in the body at the area requiring treatment. The
two currents interfere with each other at this crossing point,
resulting in a modulation of the intensity (the current intensity
increases and decreases at a regular frequency). With the dipole
vector technique the currents from the two electrode pairs are
vectorially summed in the tissue. The effect is that stimulation
only occurs into the direction of the resulting vector, which can be
adjusted over a range of 360º.
The angle is either manually adjusted and constant, or
automatically generated so that the full revolution (360°) is
automatically generated in an adjustable timing (rotation time).
Output Mode Electrodes
Available on Channel 1&2
Treatment Time 1-60 Minutes
Amplitude 0-100 mA (CC)
Beat Frequency 1-200 Hz
Carrier Frequency 2000-10,000 Hz
Cycle Time Continuous or User Defined
Ramp 0-5 s
Resolution Vector angle (manual mode) 359°
Rotation Time (automatic mode) 1-10 s
Sweep Time 14 sec
Sweep Low Beat Frequency 1-199 Hz
Sweep High Beat Frequency 2-200 Hz
Vector Scan Manual / Automatic
IRMS 0-55mA
DC component
No