Chattanooga Intelect Mobile 2 Ultrasound, Quick Start Manual

Page: 23 / 482

23
EN
WAVEFORMS (CONTINUED)
TENS- Symmetrical Biphasic
Advice on size and type of electrodes to be used is given in device GUI
"treatment guidelines" feature
The Symmetrical Biphasic waveform has a short pulse duration
and is capable of strong stimulation of nerve fibers in the skin
and in muscle. This waveform is often used in portable muscle
stimulation units, and some TENS devices.
Output Mode Electrodes
Available on Channel 1,2
Treatment Time (Stim) 1-60 min
Treatment Time (Combo) 1-30 minutes
Mode Selection (Stim) CC or CV
Mode Selection (Combo) CV
Output Intensity 0-140 mA (CC) 0-140 V (CV)
Amplitude Modulation 0% (off) to 100% on 10% steps
Burst Frequency 0-10 bps
Cycle Time Continuous or User Defined
Frequency 1-200 pps
Frequency Sweep On/Off
Phase Duration 30-400 µsec
Ramp 0-5 sec
Sweep Time 14sec
Sweep Low Frequency 1-199 pps
Sweep High Frequency 2-200 pps
IRMS 0-50mA
DC component No
TENS - HAN
Advice on size and type of electrodes to be used is given in device GUI
"treatment guidelines" feature
The HAN Waveform provides optimal parameters with a precisely
controlled sequence of Dense-and-Disperse (DD) modes of
stimulation where a burst of 8 pulses at 80Hz is alternating with
continuous stimulation (no burst), each lasting for 3 seconds. This
produces a synergistic analgesic effect.
Output Mode Electrodes
Available on Channels 1, 2
Treatment Time 1-60 min
Mode Selection CC
Output Intensity 0-100 mA (CC)
Burst Frequency 2 bps
Frequency 80 pps
Phase Duration 180 μsec
IRMS 0-19mA
DC component
No