37
Intelect Transport® Combo Therapy System
9. On the back side of the Control Board, press
down and back on the four LCD tabs and
push back through the Control Board.
See
Figure
6.21.
10. On the front side of the Control Board, pull
the LCD up to release the header from the
board.
See Figure 6.22.
11. Position the new Control Board Assembly
over the Alignment Tabs of the system Top.
Press the Control Board Assembly until the
Alignment Tabs lock the Control Board into
position.
12.
Reverse
steps 1 through 10
to install the
replacement
Control
Board.
NOTE:
Do not over tighten the Stand Offs or screws.
Over tightening will damage the threads of
the brass inserts and Stand Offs.
6 REMOVAL & REPLACEMENT
6.7 CONTROL BOARD ASSEMBLY CONTINUED
LCD TABS
FIGURE 6.21
FIGURE 6.22
LCD HEADER
PIN
