Outside Safety
Loop
Inside Safety
Loop
Outside Property
Inside Property
Entrapment Danger
Safety Danger
Outside Safety
Loop
Inside Safety
Loop
Outside Property
Inside Property
Safety Danger
Edge sensor for close cycle
Edge sensor
for close cycle
Edge sensor for open cycle
Edge sensor for open cycle
Edge sensor for open cycle
Install photoelectric sensors and edge sensors to protect against any entrapment or
safety conditions encountered in your gate application.
The safety loops allow the gate to stay open when vehicles are obstructing the gate
path. Suggested for vehicles 14 feet (4.27 m) or longer. Safety loops are not
required safety devices but are recommended.
NON-CONTACT SENSORS
Use photoelectric sensor model 50-220.
CONTACT SENSORS (EDGE SENSORS)
Use edge sensor models G65MG0204, G65MG0205, G65MGR205, or G65MGS205
(2-wire, non-monitored).
To prevent SERIOUS INJURY or DEATH from a moving gate:
• Entrapment protection devices MUST be installed to protect anyone who may
come near a moving gate.
• Locate entrapment protection devices to protect in BOTH the open and close
gate cycles.
• Locate entrapment protection devices to protect between moving gate and
RIGID objects, such as posts or walls.
SAFETY
» REQUIRED SAFETY PROTECTION DEVICES
4
'
4
'
4
'
4
'
5
