5. Menus
5.2 Window menu
60
Fig. 5.38 Level field strength window parameter setting property page
The relevant parameters on the Parameter Settings property page are described as follows:
[Level Display Lower Limit]
Set the lower limit of the level display, the default value is -10dBuV.
[Level Display Range]
Set the level display range, default select 60.00dB.
[Level Unit]
Set the level unit, including dBm, dBuV.
[Demodulation Bandwidth Histogram]
Set the demodulation bandwidth histogram switch state.
[Squelch Line]
Set the squelch line switch.
2) Window selection
The window selection property page under the Level Field Strength window is shown in Fig. 5.39.
