5. Menus
5.1 General Menu
48
Fig. 5.11 Storage Table Property Page
The storage table is used to store the parameters of scan frequency points during list scan. Each line
stores one frequency point. The parameters include: serial number, activation, frequency, bandwidth,
demodulation mode, attenuation mode, squelch switch, squelch value, automatic frequency control
switch and description. Each frequency point parameter can be edited independently, in which the
activation, frequency and description can be modified directly in the table, and other parameters can be
edited in the parameter setting area at the bottom of the table. For specific operation, see
At the bottom of the storage table, there are jump input box and some buttons to operate the storage
table, which are [Copy to Suppress Table], [Activate All], [Suppress All], [Delete All], [Ascend], [Descend],
[Import] and [Export]. Their functions are detailed as follows:
[Jump Input Box]
Jump to the specified storage table line number.
[Copy to Suppression Table]
Copy the storage table information of the currently active line in the storage table to the suppression
table.
[Activate All]
Select the activation check box of each piece of information in the storage table, that is, select each
piece of information, so that when the list is swept, every frequency point in the list will be swept.
[Suppress All]
Set the activation check box for each piece of information in the storage table to be unchecked.
[Button]
Delete the information of the currently selected storage table in the storage table.
[Delete All]
Delete all information in the storage table.
[Ascend]
Arrange each piece of information in the list from low frequency to high frequency.
[Descend]
Arrange each piece of information in the list from high frequency to low frequency.
