38
By pressing
you stop measurement. The state of measurement indicator will change
from to .
2.5.5 Consulting measured data
While the SC310 is not measuring, ( ) you may consult all the measured functions.
To consult them, apply the same procedure as described in the section 2.5.3
on viewing data
while measurement is in progress.
2.6 Overload indicator
The SC310 is equipped with an overload indicator for each function. If overloading occurs
during measurement, the
^
sign will appear before the function affected by overloading.
When a function registers overload, its corresponding measurement will be incorrect.
When overloading occurs, the
indication will appear in the bottom right-hand corner of the
screen.
2.7 SC310 menu: Register and setting management
This section describes all options accessible from the SC310 menu, a major one of which is
memory management and SC310 settings (screens, language, date and time, etc.).
When supplied, the SC310 is programmed with an initial setting that allows you to carry out
measurements without having to reset the unit prior to beginning measurement.
2.7.1 Access to the menu
To access the SC310 menu press:
The following screen will appear:
This screen displays the main setting menu together with the date and time of the SC310
clock. It also tells you how much memory space is available.
