126
10.4 Using the SC310
10.4.1 Starting the SC310
To start the SC310, press the key:
The
logo, together with the
SC310
sound level meter model will appear on the
screen. A few seconds later, the initial screen predetermined in the configuration menu
option will appear.
If the SC310 does not switch on, check that fully charged batteries are fitted or that it is
connected to a suitable power supply.
10.4.2 Accessing to the Vibration mode
Turn on the SC310 and check there is no measurement running ( ), press sequentially the
key until appears the title “VIBRATION”. Next will appear the vibration mode on the
screen. This mode can be identified by the
indication that will appear at the right upper
part from the screen.
10.4.3 Accessing to the FFT narrow band frequency analysis mode
Turn on the SC310 and check there is no measurement running ( ), press sequentially the
key until appears the title “FFT V”. Next will appear the FFT narrow band frequency
analysis vibration mode on the screen. This mode can be identified by the
indication
that will appear at the upper right zone of the screen.
10.4.4 Turn off the SC310
To turn off the SC310, check that no measurement is running ( ) and press:
10.4.5 SC310 Menu
While there is no measurement running ( ) you can access to the SC310 menu by
pressing:
All the menu options are available.
