SC310
User’s Manual
19
To detach the preamplifier from the sound level meter, pull
the preamplifier connector [3], as shown in the figure. Do
not pull the preamplifier itself [2].
To reconnect the preamplifier to the sound level
meter, introduce the preamplifier LEMO male
plug [3] into the sound level meter LEMO socket
[4] until they click together. The red dot on the
preamplifier connector must coincide with the
red dot on the sound level meter connector.
VERY IMPORTANT!
Do not attempt to detach or connect the preamplifier by unscrewing or
screwing the connector [3]. This will damage the sound level meter.
NOTE
: Extension cables do not have any effect inside the measuring frequency band. In any
case, it is necessary to readjust the SC310 when using extension cables.
If you have purchased any of the
extension cables, you can use the
TR001 adapter to fit the
preamp microphone to the
TR-40 tripod. To do that, follow the
next steps:
1) Put the LEMO socket of the
extension cable through the
TR001 adapter.
2) Fix it with the help of the
screwdriver.
3) Screw the adaptor into the
tripod.
4) Plug in the preamplifier.
1 2
3 4
