124
•
Connect the accelerometer to the PA001 preamplifier, introducing the BNC male connector
from the accelerometer plug into the BNC female connector from the preamplifier. To
introduce it you should make the groove coincide from both connectors. Once it is
introduced, turn the external ring from the accelerometer until this gets fixed.
10.1.4 If you want to connect a different accelerometer
If you want to connect an accelerometer different to a
accelerometers, this
should be an ICP
©
type (Integrated Circuit Piezoelectric).
Connect the accelerometer to the PA001 preamplifier, as it is indicated in the section 10.1.3.
The supply is done through a constant current supply of 1.8 mA, with a voltage of 28 V.
10.1.5 Extension Cables
With the ICP
©
accelerometers, extension cables can be used.
