Centurion BENINCA IT24N, Installation Instructions Manual

Page: 8 / 48

1. Declaration of conformity
page 5
Manufacturer: Automatismi Benincà spA
Address: Via Capitello, 45 - 36066 Sandrigo (VI) - Italia
Herewith declares that: the operator for hinged gates model DU.IT24N
 is intended to be incorpored into machinery or to be assembled with other machinery to constitute
machinery covered by Directive 89/392 EEC, as amended;

does therefore not in every respect comply with the provisions of this Directive;

does comply with the provisions of the following other EEC Directives:
Direttiva compatibilità elettromagnetica 89/336/CEE, 93/68/CEE.
and that:

the following (parts/clauses of) harmonized standards have been applied:
EN 55022, EN 61000-3-2, EN 61000-3-3, EN 50082-1.
And furthermore declares that it is not allowed to put the machinery into service until the machinery
into which it is to be incorporated or of which it is to be a component has been found and declared to be
in conformity with the provisions of Directive 89/392/EEC and with national implementing legislation,
i.e. as a whole, including the machinery referred to in this declaration.
Benincà Luigi, Responsabile legale.
Sndrigo, 10/01/2005.