Centurion BENINCA IT24N, Installation Instructions Manual

Page: 24 / 48

7. Re-install the gate ensuring that the drive
assembly ball bearing is placed in the cup
of the foundation box pivot before lowering
the
drive assembly onto the pivot.
page 21
FIGURE 21
8. Join the linkage arm together with the
drive assembly , as mentioned in point four
on the pervious page.
FIGURE 22
Limit switches and
mechanical endstops
Closed endstop
1. It is necessary to mount a solid mechanical
endstop into the ground. Ensure that the gate
leaves stop firmly up against the stop and are
perfectly aligned with each other in the closed
position.
Gate lock
2. For greater security and if the gate leaf is wider than 2.5m, it is recommended that a gate lock
is fitted together with the mechanical endstops to fully secure the gates in the closed position.
FIGURE 23