page 17
FIGURE 12
FIGURE 10
Seal between
casing and
conduit
To controller
Cable conduit
Casing pivot
Horizontal
and flush
with ground
Line of
gate hinges
FIGURE 11
6. Insert the
foundation box
into the hole.
Ensure the box is placed in a horizontal
position, with the casing pivot at exactly 90°
to the base, and perfectly aligned with the
gate's hinge.
7. Lay a 30mm PVC conduit through the cable
hole – the conduit must be routed back to the
controller housing.
5. Cover the drainage holes on the inside with
duct tape.
8. Complete casting the foundation box by
filling in around the sides with concrete.
Summary of Contents for BENINCA IT24N
