SMS Text & Android Application for various programming
Telephone Numbers Entry & SMS Controls
Telephone Number Redial Times
Telephone Number Display - ON / OFF
Voice Message Recording for playing on Telephone calls during Intrusion - Optional
Wireless Sensors, Remotes & Panic Keys Registering/Deletion
Wireless Sensor
– Operating Mode
Wired Zones
– Operating Mode
Wired Zones Programmable Delay
Wired Zones Sensing Delay
Precautions
Trouble Shooting
Technical Specifications
Terms of Warranty
Index of - Wireless Sensor Numbers & their corresponding Names
Note:
-
Copper Connections Pvt. Ltd reserves the right to alter equipment specifications and descriptions contained herein
and make no commitment to update or keep current the information herein.
All information herein is subject to change at any time without notice. No part of this publication shall be deemed to
be part of any contract or commitment whatsoever.
-
Product specifications and features are subject to changes without prior notice due to our constant endeavor to
improve the product.
.
Features
.
Auto Detect Open Door
When the system is being ARMED, if any door having Magnetic Switch (Wired or Wireless) is open, the system will
alert the user with a intermittent Siren Sound. The same is true for all wired sensors.
During this time, if the Opened Sensor or the opened Wired Zone is closed, the system will get ARMED and the
intermittent Siren sound will stop.
The main Panel display in this case is explained under
the heading “Display explanations” – sub heading “while
Arming the system”.
Always Armed Zones
Some sensors can be configured to work 24 Hours. Whether the system is ARMED or not, these sensors would
initiate Siren hooting and Telephone dialing.
For example, a heat detector can be placed near Generator so that whenever generator heats due to a fault, the
siren would alert the user & also inform on his Cell number.
For further details refer
the heading “Wireless Sensor – Operating Mode” and “Wired Sensor – Operating Mode”
Auto ARM / DISARM - Day Wise
System can be programmed to ARM / DISARM at 3 different sets of timings for each day of the week. User can also
enter up to 10 Holidays in the system. On those days the system continues in the previous day’s status
Example: If the user has off days on Saturday and Sunday then the system can be programmed to remain ARMED
on these 2 days. And for rest of the week the system will ARM & DISARM at the set time. For further
details refer the heading “Auto Arm / Disarm Time”
ARM Bypass
User has option to ARM all the Zones or selected Zones. This helps in ARMING the system while servants are
present in some part of the building.
For further details refer the heading “ARM Bypass”
Auto Dialer
(Dialing through GSM SIM during intrusion)
The system dials up to 6 Telephone numbers and plays siren sound (pre-recorded message-Optional), during
intrusion.
After 10 secs of Siren Sound, it plays the message “Batt low, Wired Zone Open, Wireless Sensor
Number, etc”
Each Telephone number can be programmed to dial from 1 to 15 times.
For further details refer the headings ”Telephone Numbers Entry” + “Telephone Number Redial Times” +
“Telephone Number Display - ON / OFF”
Battery
(Rechargeable)
In-built Li rechargeable batteries
for
backup lasting up to 15 hours. Can be extended by
connecting optional BAS-PS (Power Supply with 12V 7AH Maintenance Free Battery).
Battery Low warning
– of Main Unit
When the in-built Batteries of the Main Unit goes low & the SYSTEM is in ARMED condition, it will dial the pre-fed
Telephone number to inform the user with a Voice Message “Battery is Low”. It is possible to Listen-in and Disarm
the system through Telephone.
In case the system is DISARMED then displ
ay will show “Main Batt is low” & it will give a beep every 15 secs. In
this condition, the display back light keeps getting ON for 10 secs and then OFF for 10 secs.
Note: When Battery goes low and the system is ARMED, intrusion will not work.
Battery Low warning
– of Wireless Magnetic / Vibration Sensors (MSW, VSW, VSW-T, PIRW, PIRW-T)
When the cell of any of the wireless Magnetic / Vibration Sensors goes low & the system is in ARMED condition,
it will dial the pre-fed
Telephone number to inform the user with a Voice Message “Battery is Low + ID Number”.
The user can Disarm the system & can also Listen-in.
When a new Cell is restored in the Sensor, the system registers that the sensor is now operative.
