When the cell of any of the wireless Magnetic / Vibration Sensors goes low & the system is in DISARMED
condition, the display gives a message and the display back light keeps getting ON for 10 secs and then OFF for
10 secs. During this condition, the system also gives a mild beep every 15 secs.
Note:
However, SMS message is not to be relied upon and low battery LED indication on the sensor should be
checked periodically.
Capacity: Can connect to 75 Wireless Sensors
: Has 8 Wired zones & each Zone can connect to unlimited Wired Sensors
The system can work with up to 75 Wireless Sensors (including Wireless Remotes & Signal Repeaters) and any
number of Wired Sensors as long as the total resistance of the Sensors and the wires is less than 200 Ohms.
CMS (Central Monitoring Station) Services
With this feature, all or selected events are logged with a Central Monitoring Station maintained by the Copper
Connections Pvt Ltd. In the event of any intrusion, the attendant at CMS will take necessary action (as desired by
the user). Also in the event of battery of the Main Unit or compatible wireless sensors going low, the CMS get
notified and reminds the user. The CMS can also keep the record of events related to ARMING and DISARMING
of the system. This facility can be availed from Copper Connections Pvt Ltd on annual charges basis.
Display of the Zone / Sensor during intrusion
in order to identify the area of intrusion.
The system displays the Wired Zone Number / Wireless Sensor number that is open.
For furth
er details, refer the heading “Display explanations” – sub heading “During Intrusion”
Note: The system also informs the user through Telephone line, the Wireless Sensor number that has activated.
Refer “Voice Messages” heading given below.
Electrical Lights ON during Intrusion
(Optional)
Selected Light load (not exceeding 200Watts) can be connected to it which gets ON whenever there is an
intrusion.
Listen-In / Talk-In
User can make a Telephone call from anywhere and listen to the noise near the System or can even talk through
the main unit. The same is true in case of intrusion as well.
Multilevel Passwords
The system has 1 Master & 5 User Passwords
Master Password can do all operations and programming as well. User level Passwords can only ARM or
DISARM the system. The History records would show which Password had ARMED / DISARMED the system.
Remote Monitoring
– Whenever user wants or during Intrusion.
User can make a Telephone call from anywhere and perform the following:
Listen to the voices near the equipment or talk through it.
ARM or DISARM the system.
Set Siren ON / OFF
Listen to the Wired Zone / Wireless Sensors that are open
The same can be done during Intrusion.
For further details, refer the heading “Remote monitoring through Telephone line” & “Remote monitoring during
Intrusion”
Record of History of last 100 events
with date & time stamping, to check the history of various operations.
For further details, refer the heading “Record of History”
Siren - Built in
One Siren comes built into the system with option to connect an external Siren.
More than one External Sirens can be provided by using “BAS-PS” power supply.
Refer the main heading = Installation & sub heading =
Connector
“
Siren” for External Siren
To disable the Siren sound during Intrusion, refer
the heading “Siren ON or OFF “
Signal Strength Display of GSM
User can check the strength of GSM signals received at the location where the system is installed. This helps in
locating suitable place of installation. Moreover the system cannot be ARMED when the signal strength is below
level 15.
Signal Repeaters
(Optional)
They are used for increasing the operating distance of Wireless Sensors from the Main Unit.
It doesn’t increase
the range of Wireless Flashing Siren.
For further details, refer the heading “Signal Repeater – Wireless”
Silent Panic
User has the option to press “Panic” or “Silent Panic” keys from Remote / Main Unit. In case of “Panic”, the
system activates the Siren as well as dial out on Tel Line. In case of Silent PANIC, the system only dials out on
Tel Line.
Silent ARM
When the System is ARMED from the main unit, there is no Key Tone / Voice command. This helps the user to
ARM the system without drawing unwanted attention.
SIM Absent Alarm
When the system is switched ON it checks for the presence of SIM card. If SIM card is not present, the system
will give appropriate message for the same and beeps will long intervals. In this condition the user cannot ARM
the system.
SIM Balance Checking & various Programming through SMS
From Main Panel
Press 0 # - Enter the Balance Enquiry Codes of Service Provider (*123# in case of Airtel)
– Press #.
Balance amount will be displayed.
