Casio CFX-9850G PLUS Page 485 User'S Manual & Technical Reference Download | Manualshive

Page: 485 / 486

background image

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A. (not appli-
cable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.  This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no
guarantee  that  interference  will  not  occur  in  a  particular  installation.    If  this  equipment  does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Proper connectors must be used for connection to host computer and/or peripherals in order to
meet FCC emission limits.

Connector SB-62

Power Graphic Unit to Power Graphic Unit

Connector FA-123

Power Graphic Unit to PC for IBM/Macintosh Machine

IBM is a registered trademark of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Computer, Inc.

Declaration of Conformity

Model Number:

fx-9750G PLUS/CFX-9850G PLUS/CFX-9850GB PLUS/CFX-9950GB PLUS

Trade Name:

CASIO COMPUTER CO., LTD.

Responsible party:

CASIO, INC.

Address:

570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801

Telephone number:

973-361-5400

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

«
...
483
484
485
486
»

Summary of Contents for CFX-9850G PLUS







































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CFX-9850G PLUS

DIGITAL TO TV DT-202

Brand: Promax Pages: 4

Brand: Promax Pages: 29

Brand: Datexx Pages: 1

Brand: Datexx Pages: 1

Brand: Heathkit Pages: 28

Brand: IKUSI Pages: 24

Brand: Casio Pages: 20

Brand: ibico Pages: 66

Brand: RCA Pages: 2

Brand: J.Burrows Pages: 6

Brand: GSS Pages: 31

EN129 Thru Zero Oscillator

Brand: Dannysound Pages: 82

Frame Master II

Brand: Calculated Industries Pages: 56

Brand: RCA Pages: 8

HD DVB-T MODULATOR

Brand: Argent Cables Pages: 10

HDTV TRANSMODULATOR - Dual 8PSK to QAM

Brand: Televes Pages: 48

Brand: König Electronic Pages: 60

Brand: GFI System Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands