Casio CFX-9850G PLUS, User'S Manual & Technical Reference

Page: 295 / 486

267
Draw a logistic regression graph based on the parameters obtained from the
analytical results.
6
(DRAW)
k k
k k k
Residual Calculation
Actual plot points (
y
-coordinates) and regression model distance can be calcu-
lated during regression calculations.
P.6
While the statistical data list is on the display, recall the set up screen to specify a
list (“
List 1
” through “
List 6
”) for “Resid List”. Calculated residual data is stored in
the specified list.
The vertical distance from the plots to the regression model will be stored.
Plots that are higher than the regression model are positive, while those that are
lower are negative.
Residual calculation can be performed and saved for all regression models.
Any data already existing in the selected list is cleared. The residual of each plot is
stored in the same precedence as the data used as the model.
k k k k k
Displaying Paired-Variable Statistical Results
Paired-variable statistics can be expressed as both graphs and parameter values.
When these graphs are displayed, the menu at the bottom of the screen appears
as below.
• {
2VAR
} ... {paired-variable calculation result menu}
Pressing
4
(2VAR) displays the following screen.
Calculating and Graphing Paired-Variable Statistical Data
18 - 4