Casio CFX-9850G PLUS Page 149 User'S Manual & Technical Reference Download

Page: 149 / 486

121

• You can use the set up screen settings to alter the appearance of the graph

screen as shown below.

• Grid: On (Axes: On Label: Off)

This setting causes dots to appear at the grid intersects on the display.

• Axes: Off (Label: Off Grid: Off)

This setting clears the axis lines from the display.

• Label: On (Axes: On Grid: Off)

This setting displays labels for the

- and

-axes.

• A polar coordinate (

=) or parametric graph will appear coarse if the settings

you make in the View Window cause the T,

pitch value to be too large,

relative to the differential between the T,

min and T,

max settings. If the

settings you make cause the T,

pitch value to be too small relative to the

differential between the T,

min and T,

max settings, on the other hand, the

graph will take a very long time to draw.

• Attempting to draw a graph for an expression in which X is input for an X =

constant expression results in an error.

Graph Function Operations

8 - 3

P.6

Summary of Contents for CFX-9850G PLUS







































































































































































































































































































































































































































































































Search results

Summary of Contents for CFX-9850G PLUS

Reviews:

Related manuals for CFX-9850G PLUS

Brands by name

Popular brands

Casio CFX-9850G PLUS, User'S Manual & Technical Reference

Search results

Summary of Contents for CFX-9850G PLUS

Reviews:

Related manuals for CFX-9850G PLUS

Brands by name

Popular brands