3
Key Functions
During weighing
During menu selection (*1)
Key
Pressing Once
and Releasing
Pressing and
Holding for
About 3
Seconds
Pressing Once
and Releasing
Pressing and
Holding for
About 3
Seconds
Switches
between the
operation and
STAND-BY
modes.
Exits the
Application
Measurement
function.
Returns to the
previous menu.
Returns to the
mass display.
Enters
sensitivity
calibration or
menu selection.
Sets the sample
weight in the air
for solid specific
gravity
measurement.
Enters the
setting menus
when piece
counting or %
units are
displayed.
Moves to the
next Menu Map
item.
Tares the
balance.
(Displays zero)
(*5)
Selects and sets
the currently
displayed Menu
Map item.
Changes the unit
selection. (*2)
Switches
between the 1d
and 10d display.
(*3)
Increases the
numeric value of
the blinking
digit by 1.
Sends the
displayed value
to an attached
peripheral
device.
During
STAND-BY or
mass display,
the current time
is sent to an
attached
peripheral
device. (*4)
Moves the
blinking cursor
to the next digit.
*1
Refer to Section 6. “MENU SELECTION”.
*2
Units other than “g” must be registered and set before they can be used for
measurement. Gramme (or gram) (g) is the only unit that is registered
