12
6.3. SEttinG Menu
From the mass display, press the CAL/MENUkey repeatedly until
"SEttinG"
is displayed. Press the
→
O/T
←
key to enter into the next menu
level. Items that are set in this menu level include calibration of the built- in
weight, standard span calibration, external weight value for span calibration,
external weight value for calibration of the built- in weight, balance ID,
solvent and sinker specific gravity, execution time for Clock-CAL, date,
time, printing corresponding to GLP/GMP, automatic span calibration,
Clock-CAL and date/time print.
Operate the keys according to the following descriptions to set each item.
Select standard span calibration method:
SEttinG
CAL dEF
E CAL
→
Sets the span calibration
with the external weight.
E tEST
→
Sets the span check
with the external weight.
i CAL
→
Sets the span calibration with
the built- in weight. (CAW/CAX
series only)
i tESt
→
Sets the span check with the built-
in weight. (CAW/CAX series
only)
CAL SEt
↔
Enters the next menu level (external weight
value setting mode).
F
See Section
15. “EXTERNAL WEIGHT
VALUE FOR SPAN CALIBRATION.
”
PCAL.SEt
↔
Enters the next menu level
(setting mode of an external weight value
for the built-in weight calibration). *1
F
See Section
16. “EXTERNAL WEIGHT
VALUE FOR BUILT-IN WEIGHT
CALIBRATION.
”
PcAL
↔
Enters the next menu level (calibration
mode of the built- in weight). *1
F
See Section
17. “CALIBRATION OF
THE BUILT-IN WEIGHT.”
id:1234
↔
Enters the next menu level (Balance ID
setting mode).
F
See Section
18. “BALANCE ID
NUMBER.
”
GLP:on
GLP-on
→
Sets the GLP/GMP
corresponding output to ON.
GLP-oF
→
Sets the GLP/GMP
corresponding output to OFF.
