28
If it is impossible to convert the value into %,
"Err 20"
appears for several
seconds and then, the display returns to the mass display.
(H type)
<REF.<Min. display
value×100
% conversion
not possible
Min. display value×100
<REF.<Min.
display value×1000
100%
Min. display value×1000 <REF.<Min. display
value×10000
100.0%
Min. display value×10000 <REF.<Min. display
value×100000
100.00%
Min. display value×100000
<REF.<Min.
display value×1000000
100.000%
Min. display value×1000000
<REF.
100.0000%
10.2
Number of Pieces
This balance is able to display the number of pieces (PCS) by measuring the
mass of the sample. The reference numbers to measure unit mass amount
are 10, 20, 50, and 100pcs. The larger the reference number, the higher the
accuracy of measurement. The minimum unit mass is "0.0100 g."
Procedure
(1) Register the number of pieces (PCS) unit.
F
See Section
10. “REGISTRATION, RELEASE, AND
SELECTION OF MEASUREMENT UNIT.”
If PCS is already registered, it is not necessary to register it again.
(2) Place a weighing vessel on the pan and press the
→
O/T
←
key.
(3) Add the number of samples you wish to measure to the pan.
(4) Confirm that the stability symbol has illuminated.
(5) Press the UNIT key in mass display to select the PCS unit.
(6) Press and hold the CAL/MENU key until
"SEt 10PCS"
is
displayed.
(7) Every time the CAL/MENU key is pressed, the display changes in
the order
"SEt 10PCS"
,
"SEt 20 PCS"
,
"SEt 50 PCS"
, and
"SEt
100 PCS."
(8) Display the number of pieces you wish to set and press the
→
O/T
←
key.
(9) "SEt" is displayed for several seconds and the number of pieces is
displayed.
