31
11. AUTO PRINT
By setting Auto PRINT, after the displayed value is stabilized, it is output
from DATA I/O and RS232C connector. After that, the displayed value is
output whenever it is stabilized even if a different sample is loaded.
After the gram-display of the balance falls within ±5 counts of zero, the
displa yed value is printed the next time a sample that weights more than 10
counts is loaded and the display is stabilized. Unload the first sample and
allow the display to return to zero ±3 counts before loading the next sample.
Regardless of the unit displayed, 1 count is equivalent to 0.1 mg.
Procedure
(1) Press the CAL/MENU key several times from the mass display.
When
"FUnC.SEL"
is displayed, press the
→
O/T
←
key.
(2) Press the CAL/MENU key several times to display
"AtPrt:**."
The ** indicate the current setting.
"on"
indicates that the Auto
Print function is active and
"oF"
indicates that the function is
released.
(3) To change the settings, press the
→
O/T
←
key while
"AtPrt:**"
is
displayed.
(4) Each time the CAL/MENU key is pressed, the display switches
between
"AP-oF"
and
"AP-on".
When the current settings are
displayed, the stability symbol illuminates.
(5) Press the
→
O/T
←
key to change the setting, or press the
POWER/BRK key to return to
"AtPrt:**"
without changing the
settings.
(6) Press and hold the POWER/BRK key to return to mass display.
12. ANALOG DISPLAY
The CAW/CAX/CAY series balance is equipped to display the ratio of the
current weight against the maximum weighing capacity. This function is
activated or released by setting it to display or not to display.
Procedure
(1) Press the CAL/MENU key several times from the mass display.
When
"FUnC.SEL"
is displayed, press the
→
O/T
←
key.
(2) Press the CAL/MENU several times to display
"AdiSP:**."
The ** indicate the current settings for the analog display.
"on"
indicates that the function is activated and
"oF"
indicates that the
function is released.
