![background image](http://html1.mh-extra.com/html/carrier/truvu-vvtzc-e2/truvu-vvtzc-e2_installation-and-startup-manual_2562519126.webp)
Appendix A: TV-VVTZC-E2 Points/Properties
TruVu™ VVTZC
-E2
©2022 Carrier.
Installation and Start-up Guide
All rights reserved.
120
WS Battery Strength %
—
Displays charge strength indicated on the wireless space
temperature sensor. If there are multiple wireless sensors, it displays the lowest value.
R:
_%
WS Signal Strength %
—
Displays radio signal strength of the wireless space temperature
sensor. If there are multiple wireless sensors, it displays the lowest value.
R:
_%
Rnet Sensed Occupancy
–
Displays occupancy status detected by wireless infrared
motion sensor.
R:
Off/On
ZS model to show on graphic
–
Select the ZS model, from the drop-down list, that you
want to display on the graphic.
D:
R:
ZS Pro model
None
ZS Pro model
ZS Base model
ZS Plus model
WS model to show on graphic
–
Select the wireless model, from the drop-down list, that
you want to display on the graphic.
D:
R:
WS Plus model
WS Base model
WS Plus model
WS Pro model
Net Space Temp to show on graphic
—
Select the type of sensor to display on graphic.
D:
R:
Equipment Touch
Network Temp
Equipment Touch
System Space Temperature
–
The current value of the controlling space temperature
received over the network from another source. -999 indicates no value has been
received and it will not be used.
R:
-50 to 150°F
(-45.5 to 65.5°C)
System Setpoint Adjustment
–
The space temperature setpoint adjustment value
received over the network.
R:
-5 to 5 °F
(-2.7 to 2.7 °C)
System Space RH
–
The relative humidity received over the network. -999 indicates no
value has been received and it will not be used.
R:
2 to 100%
System Space AQ
–
The indoor air quality received over the network. -999 indicates no
value has been received and it will not be used.
R:
300 to 9999 ppm
System Cool Demand Level
–
The value received over the network and used by the
demand limiting function to expand the cooling setpoint.
R:
0 to 3
System Heat Demand Level
–
The value received over the network and used by the
demand limiting function to expand the heating setpoint.
R:
0 to 3
System Outdoor Air Temperature
–
The OAT received over the network.
R:
-50 to 150°F
(-45.5 to 65.5°C)
System Occupancy
–
The status of the
System Occupancy
network point.
D:
R:
Unoccupied
Unoccupied/Occupied