![background image](http://html1.mh-extra.com/html/carrier/truvu-vvtzc-e2/truvu-vvtzc-e2_installation-and-startup-manual_2562519124.webp)
Appendix A: TV-VVTZC-E2 Points/Properties
TruVu™ VVTZC
-E2
©2022 Carrier.
Installation and Start-up Guide
All rights reserved.
118
Sensor Binder
- Use the
Associated Sensors
table to configure the Rnet to use additional
ZS or wireless sensors.
•
Network Type
- Set to
Rnet
•
Address
- Enter the DIP switch settings that are on the additional ZS sensors (up to 5
total) or RnetID assigned to each wireless sensor in SensorBuilder
•
Lock Display
- Check to make the sensor display-only
D:
(Index)
- (1)
Network Type
- Rnet
Address
- 1
Zone Temp
- Configure additional ZS or wireless temperature sensors used on the TV-
VVTZC-E2.
•
Use
- Check to include ZS or wireless sensors' value in the
Combined Algorithm
(
Average
is the default).
•
Raw Value
- Displays sensed temperature for each ZS or wireless temperature
sensor's address
•
Calibration
- If needed, enter value to adjust the
Corrected Value
from the
Raw
Value
, in order to calibrate an individual ZS or wireless sensor's sensed value.
•
Combination Algorithm
- Use
Average
,
Maximum
, or
Minimum
zone temperature to
calculate the
Corrected Value
for temperature control.
D:
(Index) Area
- (1) Main
Sensor
Use -
checked
Calibration
- 0
Combination Algorithm
-
Average
Input Smoothing
- None
Show on Sensors
-
Calculated Value
Display Resolution
- 1
COV Increment
- .1