Downloading the TV-VVTZC-E2
TruVu™ VVTZC
-E2
©2022 Carrier.
Installation and Start-up Guide
All rights reserved.
68
Download to send the following items to the TV-VVTZC-E2:
Item
Notes
Up to 2 control
programs, depending on
available memory
Must be in
i-Vux.x\webroot\
<system_name>
\programs
.
drv_fwex driver NOTE
The driver must be in
WebCTRLx.x\webroot\
<system_name>
\drivers
.
NOTE
To verify that you have the driver's latest version, go to the Carrier Partner
Community website and compare the latest version to the TV-VVTZC-E2's driver in
SiteBuilder.
Editable properties
Schedules
If you change any of the above items or the TV-VVTZC-E2's address after the initial download, you must download
again. The first download takes longer than subsequent downloads.
CAUTIONS
•
The TV-VVTZC-E2 will lose stored data, such as trends, when you download.
•
The TV-VVTZC-E2 outputs will not maintain their states when you download. This could cause equipment
controlled by the TV-VVTZC-E2 to shut down and/or restart.
To download from the i-Vu® interface
1
On the i-Vu®
Network
tree, select the TV-VVTZC-E2.
2
Click
Downloads
.
3
Do one of the following:
○
If the controller is in the Downloads list, go to step 4.
○
If the controller is not in the list:
a. Click
Add
.
b. In the pop-up, select the controller.
c. Select
All Content
.
d. Click
Add
.
e. Click
Close
.
4
Select the controller in the Downloads list.
5
Click
Start
.
NOTES
•
If the download fails, locate, and resolve the problem, then retry the download.
•
You can also download from the
Devices
page.
Downloading the TV-VVTZC-E2
