CL-3
Start and operate machine. Complete the following:
1. Complete component test (make sure EXVs are checked after liquid line service valves are opened).
2. Check refrigerant and oil charge. Record charge information below.
3. Record compressor and condenser fan motor current.
4. Record operating data.
5. Provide operating instructions to owner’s personnel. Instruction time _______ hours
Circuit A
Circuit B
Circuit C
Refrigerant Charge
__________
___________
___________
Additional charge required
__________
___________
___________
Oil Charge
Indicate level in sight glass of compressors A1, B1 and C1.
Additional oil charge required.
Circuit A ______
Circuit B ______
Circuit C ______
Record Software Versions
MODE — RUN STATUS
(Press ENTER and ESCAPE simultaneously to obtain software versions)
A1
B1
C1
A2
B2
C2
A3
B3
C3
A4
B4
C4
SUB-MODE
ITEM
DISPLAY
ITEM EXPANSION
VERS
APPL
CSA-SR- __ __ __ __ __ __
MARQ
EXV1
EXV2
AUX1
AUX2
AUX3
Summary of Contents for AQUASNAP 30RBA315
