![background image](http://html1.mh-extra.com/html/carrier/aquasnap-30rba315/aquasnap-30rba315_controls-start-up-operation-service-and-troubleshooting-instructions_2561847040.webp)
40
Table 30 — 4 to 20 mA Temperature Reset Configuration
NOTE:
Bold
values indicate sub-mode level.
MODE
KEYPAD ENTRY
DISPLAY
ITEM EXPANSION
COMMENT
CONFIGURATION
DISP
UNIT
SERV
OPTN
RSET
Reset Cool and Heat Tmp
CRST
Cooling Reset Type
0
No Reset
0
No Reset
Flashing to indicate Edit mode. May require Password
/
3
4-20 mA Input
Use up or down arrows to change value to 3.
3
Accepts the change.
CRST
At mode level
SETPOINTS
/
Change to Setpoints Mode
COOL
Cooling Setpoints
CSP.1
Cooling Setpoint 1
x 2
CSP.3
Cooling Setpoint 3
CRV1
Current No Reset Val
Outdoor Temperature where no temperature reset is
required.
0
Value of CRV1
0
Flashing to indicate Edit mode
4.0
Value of No Temperature Reset, 4 from the example.
4.0
Accepts the change.
CRV1
CRV2
Current Full Reset Val
Current value where full temperature reset, DGRC is
required.
0
Value of CRV2.
0
Flashing to indicate Edit mode
20.0
Value of full Temperature Reset, 20 from the example.
20.0
Accepts the change.
CRV2
x 6
CRS2
DGRC
Degrees Cool Reset
Amount of temperature reset required.
0
Value of DGRC
0
Flashing to indicate Edit mode
5.0
Amount of Temperature Reset required, 5 from the
example.
5.0
Accepts the change.
DGRC
ENTER
ENTER
ENTER
ENTER
ENTER
ESCAPE
ESCAPE
ENTER
ENTER
ENTER
ENTER
ENTER
ESCAPE
ENTER
ENTER
ENTER
ESCAPE
ENTER
ENTER
ENTER
ESCAPE
Summary of Contents for AQUASNAP 30RBA315
