Carrier Access Network Device Axxius 800, User Manual

Page: 266 / 568

5-166 Axxius 800 - Release 2.2
CLI Commands
set
set screen
Use the set screen command to set the height of the scrolling output screen, in number of lines.
For example, if the screen height is set to 40 lines, the Command Line Interface (CLI) will print
the maximum of 40 lines of a long output before pausing. To set the screen to scroll without
pausing, set the screen height to 0.
Syntax:
set screen {screen-height|off}
Where screen-height is the number of lines in the scrolling output screen.