Additional information
SPE series
96
Operating manual
12.16
12.2 Password
The supervisor programs a Memory Card directly with the module. He
stores 10 different labels. As well he adjusts the print parameters, like
contrast, speed, etc. to the corresponding values. The user is only
supposed to read the labels from memory card and to print them.
Therefore the supervisor blocks the function menu and the entry
function by a password.
The print module is connected to a PC. The user is only supposed to
take the labels dispensed by the print module and stick them on. To
prevent, that the labels or the print module set-up will not be changed,
the supervisor blocks all print module functions (e.g. function menu,
entry menu, etc.) by a password.
The user has to change several texts before printing. It is not allowed
to change any masks (fonts, position, etc.). Therefore the supervisor
blocks the entry of mask and the function menu. By this means the
user indeed can print labels, but the print module set-up and the
masks of the labels can't be changed.
To receive a most flexible password protection, the print module
functions will be divided into several function groups:
In the function menu the print parameters can be changed (contrast,
speed, mode, ...). The password protection prevents modifications at
the print settings.
With the functions of your Memory Card labels can be stored, loaded,
....
Here the password protection has to separate, if none or only reading
functions are allowed.
With key
quant
a print can be produced. In case the print module is
connected to a PC, it can be useful, that the user is not able to
produce a print manually. So the password protection prevents that
prints can be produced manually.
Because of these different function groups the password protection is
very flexible. The print module can be adjusted best to its actual order,
as only certain functions are blocked.
Example 1:
Example 2:
Example 3:
1. Function menu:
2. Memory Card:
3. Print functions:
