Carl Valentin SPE series Operating Manual Download Page 28

Page: 28 / 106

Installation

SPE series

Operating manual

12.16

4.2 Connecting the print module

The print module is equipped with a versatile power supply unit. The
device may be operated with a mains voltage of 230 V / 50-60 Hz
without any adjustments or modifications.

CAUTION!

The print module can be damaged by undefined switch-on
currents.



Set de power switch to '0' before plugging in the print
module.



Insert power cable into power connection socket (2).



Insert plug of power cable into a grounded electrical outlet.

NOTICE!

Insufficient or missing grounding can cause faults during
operation.

Ensure that all computers and connection cables connected to the
print module are grounded.



Connect print module to computer or network with a suitable
cable.

4.3 Switching the print module on and off

Once all connections have been made:



Switch on the control unit.
After switching on the control unit the main menu appears which
shows the model type, current date and time

Connecting to the
power supply

Connecting to a
computer or to a
computer network

Summary of Contents for SPE series











































































































Search results

Summary of Contents for SPE series

Reviews:

Related manuals for SPE series

Brands by name

Popular brands

Carl Valentin SPE series, Operating Manual

Search results

Summary of Contents for SPE series

Reviews:

Related manuals for SPE series

Brands by name

Popular brands