SPE series
Function menu
12.16
Operating manual
49
7.4 Dispenser I/O
In order to operate the print module in dispensing mode a print order
has to be started and the print module has to be in 'waiting' mode.
Press key
to access the function menu.
Press key
as long as you arrive at the 'Dispenser I/O' menu.
Press key
to select the menu.
In the first line of the display the dispenser mode can be selected.
In the second line the dispenser offset which is approx. 18 mm can be
set.
Press key
to arrive at the next operating mode.
Off:
It is printed without the labels are dispensed.
I/O static:
The input signal evaluated, i.e. it is printed as long as the signal
exists. The number of labels which was entered at the print start is
printed.
The set dispenser offset is not taken into consideration.
I/O static continuous:
You can find the description of this operating mode in chapter I/O
static.
Continuous means that it is printed as long as new data is transferred
via interface
The set dispenser offset is not taken into consideration.
I/O dynamic:
The external signal is evaluated dynamically, i.e. is the print module in
'waiting' mode a single label is printed at each signal changing. After
the print the set dispenser offset is executed, i.e. a backfeed is
effected.
I/O dynamic continuous:
You can find the description of this operating mode in chapter I/O
dynamic.
Continuous means that it is printed as long as new data is transferred
via interface.
Photocell:
The print module is controlled via photocell. The print module prints
automatically a label if the user takes away the label at the dispensing
ledge. The print order is finished when the target number of labels is
reached.
Photocell continuous:
You can find the description of this operating mode in chapter
photocell.
Continuous means that it is printed as long as new data is transferred
via interface.
Press key
to select additional parameters or press keys
and/or
to return to the main menu.
Dispenser I/O
operating modes
