SPE series
Additional information
12.16
Operating manual
95
12 Additional information
12.1 Column printing
With this print module several columns can be printed, i.e. the
information of one column can be printed several times (depending on
its width) on a label. Caused by this the use of the complete print
width is possible and the generating time is enormously reduced.
For example 4 columns with a width of 25 mm or 2 columns with a
width of 50 mm can be printed onto a label with a width of 100 mm.
Please note that the first label is always the one with the largest x
coordinate, i.e. it has the largest distance to the printhead.
Press key
to change to the function menu.
Press key
as long as to the 'Label layout' menu.
Press key
to confirm the selection.
Press key
as long as the menu item (see illustration) appears.
Press key
and
to set the label width. As column width the width
of one label is entered, e.g. 20.0 mm.
Press key
and
to enter the number of columns.
Press keys
and
to change the number of columns,
e.g. 4 columns at a label width of 20.0 mm.
Press key
to start a print with indication of number of labels and
number of lines. The number of labels corresponds to the number of
labels that are to print.
e.g. columns: 3, items: 4
The first four labels were printed but not label 5 and 6.
Setting the print of
several columns
