Carl Valentin SPE series Operating Manual Download Page 72

Page: 72 / 106

Maintenance and cleaning

SPE series

Operating manual

12.16

WARNING!

Risk of fire by easily inflammable label soluble!



When using label soluble, dust must be completely
removed from the print module and cleaned.

10.1 General cleaning

CAUTION!

Abrasive cleaning agents can damage the print module!



Do not use abrasives or solvents to clean the outer
surface of the print module.



Remove dust and paper fuzz in the printing area with a soft
brush or vacuum cleaner.



Clean outer surfaces with an all-purpose cleaner.

10.2 Cleaning the Transfer Ribbon Drawing Roller

A soiled print roll can lead to reduced print quality and can affect
transport of material.

1. Open cover of printing system.

2. Remove labels and transfer ribbon form the printing system.

3. Remove deposits with roller cleaner and a soft cloth.

4. If the roller appears damaged, replace it.

Summary of Contents for SPE series











































































































Search results

Summary of Contents for SPE series

Reviews:

Related manuals for SPE series

Brands by name

Popular brands

Carl Valentin SPE series, Operating Manual

Search results

Summary of Contents for SPE series

Reviews:

Related manuals for SPE series

Brands by name

Popular brands