Carl Valentin SPE series Operating Manual Download Page 27

Page: 27 / 106

SPE series

Installation

12.16

Operating manual

Installation



Lift the print mechanics and control unit out of the box.



Check the print mechanics and control unit for transport
damages.



Check delivery for completeness.



Print mechanics.



Control unit.



Power cable.



Connection cable (printhead/motors, sensors, power).



I/O accessories (female connectors for I/O, I/O 24 cable).



1 transfer ribbon roll.



Empty core, mounted on transfer ribbon rewinder.



Cleaning foil for printhead.



Documentation.



CD with printer drivers.

NOTICE!

Retain original packaging for subsequent transport.

4.1 Setting up the print module

CAUTION!

The print module and the print media can be damaged by
moisture and water.



Set up the print module only in a dry place protected
from sprayed water.



Mount the print mechanics on a vibration-free and air draught-
free.



Open cover of print module.



Remove foam transportation safeguards near the printhead.

Unpack the print
mechanics and
control unit

Scope of delivery

Summary of Contents for SPE series











































































































Search results

Summary of Contents for SPE series

Reviews:

Related manuals for SPE series

Brands by name

Popular brands

Carl Valentin SPE series, Operating Manual

Search results

Summary of Contents for SPE series

Reviews:

Related manuals for SPE series

Brands by name

Popular brands