Carl Valentin SPE series Operating Manual Download Page 67

Page: 67 / 106

SPE series

Memory Card

12.16

Operating manual

Keys:

Press key

to select the 'Load file' menu item.

Select the file you want to load and confirm the selection with key

The loaded label is now in the printer internal storage and after the
loading procedure the display shows the main menu.

Keys:

Press key

to select the 'Save label' menu item.

Select the directory and/or label you want to save and confirm the

selection with key

Confirm the query with

and the label will be saved.

After the saving procedure the display shows again the main menu.

Keys:

Press key

to select the 'Save configuration' menu item.

As standard, the proposed file name is config.cfg. This name can be
changed by the user. In this file the printer parameters are saved
which are not saved permanent in the internal Flash.

Press key

to start the saving procedure.

After the saving procedure, the display shows again the main menu.

Loading file from
memory card

Saving label onto
memory card

Saving configuration

Summary of Contents for SPE series











































































































Search results

Summary of Contents for SPE series

Reviews:

Related manuals for SPE series

Brands by name

Popular brands

Carl Valentin SPE series, Operating Manual

Search results

Summary of Contents for SPE series

Reviews:

Related manuals for SPE series

Brands by name

Popular brands