Carl Valentin COMPA II, Operating Manual

Page: 99 / 116

Compa II Error Correction
03.20 Operating manual 99
Error message Cause Remedy
70 Scanner data
Scanned data does not
correspond to the data which is
to print. Exchange printhead.
71 Invalid page
As page number either 0 or a
number > 9 is selected. Select a number between 1
and 9.
72 Page selection
A page which is not available is
selected. Check the defined pages.
73 Undefined page
The page is not defined. Check the print definition.
74 Format user guiding
Wrong format for customized
entry. Check the format string.
75 Format date/time
Wrong format for date/time. Check the format string.
76 Hotstart CF
No CF card found. If option hotstart was activated,
a CF card must be inserted.
Switch off the printer before
inserting the memory card.
77 Flip/Rotate
Selection of print of several
columns and also mirror/rotate. It is only possible to select one
of both functions.
78 System file
Loading of temporary hotstart
files. Not possible.
79 Shift variable
Faulty definition of shift times
(overlapping times).
Check definition of shift times.
80 GS1 Databar
General GS1 Databar error. Check definition and parameter
of GS1 Databar code.
81 IGP error
Protocol error IGP. Check sent data.
82 Time generation
Printing creation was still active
at print start. Reduce print speed.
Use printers' output signal for
synchronization.
Use bitmap fonts to reduce
generating time.
83 Transport protection
Both DPM position sensors
(start/end) are active. Displace zero point sensor
Check sensors in service
functions menu
84 No font data
Font and web data is missing. Run a software update.
85 No layout ID
Layout ID definition is missing. Define layout ID onto the label.
86 Layout ID
Scanned data does not
correspond to defined ID. Wrong label loaded from CF
card.
87 RFID no label
RFID unit cannot recognize a
label. Displace RFID unit or use an
offset.
88 RFID verify
Error while checking
programmed data. Faulty RFID label.
Check RFID definitions