Compa II
Function menu
03.20
Operating manual
63
Press the key
to move to the next menu item.
Indication of value in 1/100 mm.
After replacing the printhead - the print cannot be continued at the
same position on the label, the difference can be corrected across the
printing direction.
NOTICE!
The value for zero point adjustment is set ex works. After
replacing the printhead, only service personnel are allowed to
set this value anew.
Press the key
to move to the next menu item.
Indication of print layout correction in percent.
By mechanical influences (e.g. label roll size) the print layout can be
printed increased and reduced to its original size.
Value range: +10.0 %
… −10.0 %
Press the key
to move to the next menu item.
Starting with firmware version 1.70, the printer logs different events
internally. In case of service, the error cause can be located faster.
With this command, different log files are saved on an existing storage
medium (memory card or USB stick). After the 'Finish' message the
storage medium can be removed.
The files are in directory 'log':
LogMemErr.txt:
Logged errors with additional information such as
date/time and file name/line number (for developers).
LogMemStd.txt:
Logging of selected events.
LogMemNet.txt:
Data latest send via port 9100.
Parameters.log:
All printer parameters in human readable form.
TaskStatus.txt:
Status of all printer tasks.
The files
LogMemErr.txt
and
LogMemStd.txt
are written in circle, i.e.
old contents are overwritten.
The entry logged last is marked with „---„
6.12 Main Menu
Switch on the label printer and the display shows the main menu. The
main menu shows information such as printer type, current date and
time, version number of firmware and the used FPGA.
The selected display is shown for a short time, then the indication
returns to the first information.
Press the key
to move to the next information display.
Zero point adjustment
in X direction
Print /−
Write log files to
memory card
Summary of Contents for COMPA II
