Carl Valentin COMPA II, Operating Manual

Page: 70 / 116

Options Compa II
70 Operating manual 03.20
1 Print start and cut (Input)
2 Error reset (Input)
3* Number of the file to load Bit 0 (Input)
4* Number of the file to load Bit 1 (Input)
5* Number of the file to load 2 (Input)
6* Number of the file to load 3 (Input)
7* Number of the file to load 4 (Input)
8* Number of the file to load 5 (Input)
9 Error (Output)
10 Print order active (Output)
11 Dispenser photocell:
Label exists at dispenser photocell (Output)
12 Printing (Output)
13 Ready (Output)
14 No function
15 Option scanner only
Bar code not readable (Output)
16 Transfer ribbon prior warning (Output)
*
The files must be saved onto the CF card in the user directory (see
chapter 8.4, page 79).
The files must start with 1 or 2 digits (1_Etikett.prn, 02_Etikett.prn).
The files can be saved with a file extension.
In the printer status 'ready', 'waiting' or 'stop', a new file can be loaded.
The printer order will be started after charging and an already existing
printer order will be deleted.
The input signal 000000 does not charge a file and does not delete an
already existing print order.
1 Print start and cut (Input)
2 Reprint last printed label (Input)
3 Counter reset (Input)
4 Option applicator only:
Start application (Input)
5 Error reset (Input)
6 Cancel all print jobs (Input)
7 No function
8 No function
9 Error (Output)
10 Print order active (Output)
11 Dispenser photocell:
Label exists at dispenser photocell (Output)
12 Printing (Output)
13 Ready (Output)
14 Option applicator only: Ready for application (Output)
15 Option applicator only: Pad is in printing position (Output)
16 Transfer ribbon prior warning (Output)
List of registered
functions for
StdFileSetLabel
List of registered
functions for APL