Compa II
Function menu
03.20
Operating manual
53
Press the key
to move to the next menu item.
On:
A label which was loaded once from CF card can be loaded again
automatically after a restart of printer.
Procedure: The used label is saved onto CF card. The label is loaded
from CF card and printed. After switching the printer Off and again On,
the label is loaded from CF card automatically and can be printed
again. Press the key
to start the print with input of number of
labels.
NOTICE!
The last loaded label from CF card is always again loaded after
a restart of printer.
Off:
After a restart of printer the last used label must be again loaded
manually from CF card.
NOTICE!
A common use of the functions Autoload and Hotstart is not
possible. For a correct Autoload procedure the Hotstart must
be deactivated in the printer.
Press the key
to move to the next menu item.
Yes:
I In case an error occurred and printer is in stopped mode then
you can reprint the last printed labels by means of keys
and
.
No:
Only blank labels were advanced.
Press the key
to move to the next menu item.
The backfeed was optimised in the operating modes dispenser
(optional), cutter (optional) and tear off. Now, when driving into the
offset, the following label is 'pre-printed' if possible and therefore the
backfeed of label is no necessary and time can be saved.
The adjustable deceleration time is only for mode 'backfeed automatic'
of importance (see chapter 11.3, page 106).
Press the key
to move to the next menu item.
On:
A new print order is only printed after confirmation at the device.
An already active continuing print order is printed as long as the
confirmation is effected at the device.
Off:
No query appears at the display of control unit.
Press the key
to move to the next menu item.
On:
If a print order is started without previous definition of label, the
standard label is printed.
Off:
If a print order is started without previous definition of label, an
error message appears in the display.
Autoload
Manual reprint
Backfeed
Delay
Label confirmation
Standard label
Summary of Contents for COMPA II
