Carel DLAQ2DF100, User Manual

Page: 32 / 48

32
ENG
"humiFog direct" +0300073EN rel. 1.4 - 29.03.2022
Type Section Address Parameter Variable Size Min. Max. Def. UoM Dir.
Coils Remote
control 1 Alarms reset Alarms.AlrmResBySV 1 0 1 0 R/W
2 Unit on/off from supervisor OnOff _Status.SVOn 1 0 1 0 R/W
Holding
registers Remote
control 1 Unit request from supervisor zone 1 Regulation.SVReq_1 2 0 100 0 [%] R/W
3 Unit request from supervisor zone 2 Regulation.SVReq_2 2 0 100 0 [%] R/W
5 Setpoint zone 1 (humidity) RegCfg_1.SetP_hum 2 0 100 50 [%rh] R/W
7 Setpoint zone 1 (temperature) RegCfg_1.SetP_temp 2 50 [°C]/[°F] R/W
9 Setpoint limit zone 1 (humidity) RegCfg_1.SetPLim_hum 2 0 100 50 [%rh] R/W
11 Setpoint limit zone 1 (temperature) RegCfg_1.SetPLim_temp 2 50 [°C]/[°F] R/W
13 Setpoint zone 2 (humidity) RegCfg_2.SetP_hum 2 0 100 50 [%] R/W
15 Setpoint zone 2 (temperature) RegCfg_2.SetP_temp 2 50 [°C]/[°F] R/W
17 Setpoint limit zone 2 (humidity) RegCfg_2.SetPLim_hum 2 0 100 50 [%] R/W
19 Setpoint limit zone 2 (temperature) RegCfg_2.SetPLim_temp 2 50 [°C]/[°F] R/W
Tab. 10.b
10.4 List of BACnet parameters
Type Section BACNet Parameter Variable Min. Max. Def. UoM Dir
Binary
values Unit status 0 Unit on/off UnitOn 0 1 R
Alarms 1 Circuit breaker intervention Al_CircBreaker.Active 0 1 R
2 High pressure switch intervention Al_HiPSwitch.Active 0 1 R
3 High pressure Al_HiP.Active 0 1 R
4 Low pressure Al_LoP.Active 0 1 R
5 High pressure on bypass Al_HiPByPassBlk.Active 0 1 R
6 High pressure on bypass Al_HiPByPass.Active 0 1 R
7 High temperature on bypass Al_HiTByPassBlk.Active 0 1 R
8 High temperature on bypass Al_HiTByPass.Active 0 1 R
9 Low pressure on bypass Al_LoPByPass.Active 0 1 R
10 Zone drain valves error Al_Drain.Active 0 1 R
11 Expansion offl ine Al_ExpOffl ine.Active 0 1 R
12 Warning high temperature on bypass Wr_HiTByPass.Active 0 1 R
13 Retain memory error Al_Retain.Active 0 1 R
14 Retain memory writes error Al_RetainWrite.Active 0 1 R
15 Main probe 1 error Al_MainPrb_1.Active 0 1 R
16 Limit probe 1 error Al_LimPrb_1.Active 0 1 R
17 Main probe 2 error Al_MainPrb_2.Active 0 1 R
18 Limit probe 2 error Al_LimPrb_2.Active 0 1 R
19 Low pressure trasducer error Al_PressByPass.Active 0 1 R
20 Bypass temperature probe error Al_TempByPass.Active 0 1 R
21 High pressure transducer error Al_Press.Active 0 1 R
22 Missing model Al_MissModel.Active 0 1 R
23 Water treatment system alarm Al_WTS.Active 0 1 R
24 ÷ 31 Wireless probe offl ine 1 ÷ 8 Al_WPrb_1 ÷ 8.Active 0 1 R
32 Main probe 1 from wireless error Al_WPrbMain_1.Active 0 1 R
33 Limit probe 1 from wireless error Al_WPrbLim_1.Active 0 1 R
34 Main probe 2 from wireless error Al_WPrbMain_2.Active 0 1 R
35 Limit probe 2 from wireless error Al_WPrbLim_2.Active 0 1 R
36 ÷ 39 Unit 1 ÷ 4 alarm Al_NetUnit_1 ÷ 4.Active 0 1 R
40 Change oil Al_Maint_50.Active 0 1 R
41 Maintenance Wr_Maint_1000.Active 0 1 R
42 Maintenance required Al_Maint_3000.Active 0 1 R
Remote
control 43 Alarms reset Alarms.AlrmResBySV 0 1 0 RW
44 Unit on/off from supervisor OnOff _Status.SVOn 0 1 0 RW
P.I.V. Unit status 0 Unit status
0: OFF BY KEYB 5: STAND BY 10: MANUAL MODE
1: OFF BY DIN 6: PRODUCTION 11: READY BACKUP
2: OFF BY SV 7: ALARM 12: SWITCH OFF
3: OFF BY SCHED 8: FILL
4: STARTUP 9: WASH
UnitStatus 1 0 12 R
Analog
values Unit status 0 Request zone 1 ReqMsk_1 0 100 [%] R
1 Request zone 2 ReqMsk_2 0 100 [%] R
2 Production zone 1 Prod_1 0 100 [%] R
3 Production zone 2 Prod_2 0 100 [%] R
4 Water consumption 1 WProd_1 [Kg/h]/[lb/h] R
5 Water consumption 2 WProd_2 [Kg/h]/[lb/h] R
Inputs 6 Main probe 1 MainPrb_1 [%rh]/[°C/°F] R
7 Main probe 2 MainPrb_2 [%rh]/[°C/°F] R
8 Limit probe 1 LimPrb_1 [%rh]/[°C/°F] R
9 Limit probe 2 LimPrb_2 [%rh]/[°C/°F] R
10 Pressure on bypass PressByPass [bar]/[psi] R
11 Pressure on mail line Press [bar]/[psi] R
12 Bypass temperature TempByPass [°C]/[°F] R
13-15-17-19-
21-23-25-27 Humidity from wireless probe 1 ÷ 8 Inputs_WPrbs.WirelessPrbVal_1
÷ 8.Hum [%rh] R
14-16-18-20-
22-24-26-28 Temperature from wireless probe 1 ÷ 8 Inputs_WPrbs.WirelessPrbVal_1
÷ 8.Temp [°C]/[°F] R
Remote
control 29 Unit request from supervisor zone 1 Regulation.SVReq_1 0 100 0 [%] RW
30 Unit request from supervisor zone 2 Regulation.SVReq_2 0 100 0 [%] RW
31 Setpoint zone 1 (humidity) RegCfg_1.SetP_hum 0 100 50 [%rh] RW
32 Setpoint zone 1 (temperature) RegCfg_1.SetP_temp 50 [°C]/[°F] RW
33 Setpoint limit zone 1 (humidity) RegCfg_1.SetPLim_hum 0 100 50 [%rh] RW
34 Setpoint limit zone 1 (temperature) RegCfg_1.SetPLim_temp 50 [°C]/[°F] RW
35 Setpoint zone 2 (humidity) RegCfg_2.SetP_hum 0 100 50 [%] RW
36 Setpoint zone 2 (temperature) RegCfg_2.SetP_temp 50 [°C]/[°F] RW
37 Setpoint limit zone 2 (humidity) RegCfg_2.SetPLim_hum 0 100 50 [%] RW
38 Setpoint limit zone 2 (temperature) RegCfg_2.SetPLim_temp 50 [°C]/[°F] RW
Tab. 10.c