Carel DLAQ2DF100, User Manual

Page: 44 / 48

44
ENG
"humiFog direct" +0300073EN rel. 1.4 - 29.03.2022
ELECTRICAL SPECIFICATIONS UA050DU*01 UA090DU*01
Power supply 120 Vac 60 Hz single-phase 120 Vac 60 Hz single-phase
Cabinet power cable AWG 14 AWG 12
Power (cabinet only, without blowers) 0.28 kW (single-zone) 0.47 kW (single-zone)
0.38 kW (two zones) 0.57 kW (two zones)
Current (cabinet only, without blowers) 5.0 A (single-zone) 8.0 A (single-zone)
5.8 A (two zones) 8.8 A (two zones)
Maximum power (cabinet with blowers) 0.74 kW (single-zone) 0.93 kW (single-zone)
0.84 kW (two zones) 1.03 kW (two zones)
Maximum current (cabinet with blowers) 10.3 A (single-zone) 13.3 A (single-zone)
11.0 A (two zones) 14.0 A (two zones)
FLA (Full Load Amperes) 0.25HP/180W 4.2 A 0.5HP/370W 7.1 A
SCCR (Short Circuit Current Rating) 5 kA 5 kA
Minimum cable size required for blower power supply AWG 14 AWG 12
Tab. 14.f
WATER CIRCUIT SPECIFICATIONS UA050DU*01 UA090DU*01
Required feedwater quality
Feed water temperature demineralised
5...20°C/41...68°F
demineralised
5...20°C/41...68°F
Required feedwater conductivity 5-80 μS/cm 5-80 μS/cm
Required feedwater pressure 3-8 bars 3-8 bars
Water inlet connection 3/4” GAS F 3/4” GAS F
Water drain connection 1/2” GAS F 1/2” GAS F
Water outlet connection 1/4” GAS F 1/4” GAS F
Water outlet pressure 70 bars 70 bars
Maximum capacity 50 l/h 90 l/h
Tab. 14.g
FUNCTIONAL SPECIFICATIONS UA050DU*01 UA090DU*01
Number of probes allowed (temperature and/or humidity) 1 (single-zone) + limit 1 (single-zone) + limit
2 (two-zone) + limit 2 (two-zone) + limit
External signal or type of probes 0-10 V, 4-20 mA, 0-1 V, 2-10 V, 0-20 mA, NTC probe 0-10 V, 4-20 mA, 0-1 V, 2-10 V, 0-20 mA, NTC probe
Multi-probe available available
Webserver available available
Serial communication (via Ethernet and/or via RS485) Modbus, BACnet Modbus, BACnet
Tab. 14.h
14.3.3 CE version blower datasheet
Single blower units (for wall-mounting) DLA02DF*00 DLA04DF*00
Dimensions 640 x 200 x 180 mm 940 x 200 x 180 mm
Weight 4.5 kg 5.6 kg
Packaged dimensions 755 x 235 x 295 mm 1050 x 235 x 295 mm
Packaged weight 5.7 kg 7.4 kg
Delivery and storage temperature -10/50°C 0-90% -10/50°C 0-90%
Operating temperature 2/40°C 5-95% 2/40°C 5-95%
Ingress protection (IP) IP10 IP10
Conformity CE CE
Water fi tting M16x1.5 Male M16x1.5 Male
Water outlet M16x1.5 Male M16x1.5 Male
Number of nozzles 2 4
Flow-rate (depending on the type of nozzles) 3.0 l/h - 5.6 l/h - 8.0 l/h 6.0 l/h – 11.2 l/h – 16.0 l/h
Power supply 230 Vac 50 Hz 230 Vac 50 Hz
Fan total air fl ow-rate 300 m3/h 600 m3/h
Blower connection cable AWG 14 AWG 14
Maximum number of blower units (connected to one cabinet) 12 6
Tab. 14.i
Double blower units (for mounting in centre of corridor) CE version DLA04DB*00 DLA08DB*00
Dimensions 640 x 200 x 400 mm 940 x 200 x 400 mm
Weight 9.2 kg 15.5 kg
Packaged dimensions 755 x 470 x 295 mm 1050 x 470 x 295 mm
Packaged weight 11.4 kg 18.0 kg
Delivery and storage temperature -10/50°C 0-90% -10/50°C 0-90%
Operating temperature 2/40°C 5-95% 2/40°C 5-95%
Ingress protection (IP) IP10 IP10
Conformity CE CE
Water fi tting M16x1.5 Female M16x1.5 Female
Water outlet M16x1.5 Female M16x1.5 Female
Number of nozzles 4 8
Flow-rate (depending on the type of nozzles) 6.0 l/h – 11.2 l/h – 16.0 l/h 12.0 l/h – 22.4 l/h – 32 l/h
Power supply 230 Vac 50 Hz 230 Vac 50 Hz
Fan total air fl ow-rate 600 m3/h 1,200 m3/h
Blower connection cable AWG 14 AWG 14
Maximum number of blower units (connected to one cabinet) 6 3
Tab. 14.j