Step 5 (Continued)
(The Smart Dialler can store up to 5 phone numbers.
Each number can
have a maximum of 16 digits and so mobile phone numbers can be
used. Carefully choose the phone numbers of people in the order that
you wish to contact in the case of an emergency. For example you
may wish to contact a member of your family at home first, then on a
mobile or perhaps even a neighbour or friend. It is recommended that
you try and have at least 3 or more contact persons, so as to ensure the
likelihood of your call being answered.
NOTE: It is not illegal to program “000” as an emergency assist number.
However the Triple Zero Services request that “000” be positioned as
the final/last number to call. Your call will then be treated as a standard
emergency procedure by this team.)
NOW TO PROGRAM THE NUMBERS:
If the first number to be called is ‘987654321’, then press the
star (
*
)
key first (bottom left hand key), then press the number
“1” key
, then
enter the
phone number
(987654321), and finally press the
“#” key
to
end. If you hear a double beep then the number has now been stored
as the first emergency contact number.
The setting procedures for the
2nd, 3rd, 4th and 5th
telephone numbers
are the same as above except after the
star key
you press the
“2” key
for the second stored number and the
“3” key
for the third stored
number and so on.
As you enter the numbers they will appear in the Smart Dialler
indication window. The
letter P
(short for Phone) and then the
number
1
(indicating the first number is about to be stored) will appear prior
to you entering the digits of the first number. After storing each
number and pressing the
“#”
key you will hear 2 audible beeps from
the phone. This indicates that the storing of your phone number has
been successful. It is important not to rush this procedure but take
deliberate and careful note as you enter each key command.
(To change
the numbers at any time just overwrite using the same procedure.)
NOTE:
Numbers will remain stored even in the event of losing power.
INSTALLATION & PROGRAMMING
OF THE SMART DIALLER
The steps to install and program the “CareAlert” Dialler are simple.
If you do not feel confident then request the assistance of someone who is
able to do so, on your behalf. When performing the following steps please
refer to the installation diagram on page 11; it is recommended that you first
program the Smart Dialler before you install the battery and before you plug
in the “line” cable from the telephone wall jack.
12 Easy Steps:
(please view the Figures on page 11)
STEP 1.
Plug the black AC/DC power supply adapter
into a power point and
the round chrome pin into the jack labelled ‘Power’ at the rear of the Smart
Dialler. Turn on the power. A short Beep Tone will sound and LED light will
move clockwise on the indicator window provided the rear black sliding
switch is on alarm.
STEP 2.
Unplug your existing phone from the wall jack and plug it into the
back of the Smart Dialler jack labelled “TEL”.
(
NOTE:
Phones with the older
style moulded plug or the old rotary dialler telephones cannot be used. Wall
phones also can be more difficult to use due to the plugs being hidden be-
hind the actual phone. All other brands, fixed or cordless will be suitable)
STEP 3.
Place the “Function” switch on the rear of the Smart Dialler to “SET”.
The Smart Dialler will give a beep sound. A small red dot will appear in the
indication window showing that the Smart Dialler is in the “SET” mode.
STEP 4.
Pick up the handset of the telephone that is connected to the Di-
aller.
This handset may be a fixed or a cordless phone. The Smart Dialler will
work with either. If however it is a cordless phone, you will FIRSTLY need to
push the appropriate button for example ‘
call
’ or ‘
talk
’ or the green phone
symbol.
(NOTE: NO dial tone will be heard when the function switch is in the
‘set’ position).
STEP 5.
Setting and storing the first and subsequent contact phone numbers
is an easy procedure. Before doing so please read the following bracketed
information.
7
6
