25
24
In a power blackout
situation, the Dialler will
not function.
•
The 9-‐Volt
rechargeable
battery is not
holding its charge.
•
The Power
Adaptor internal
surge protector
fuse has blown
•
Replace the Rechargeable
Battery
•
Replace the Power
Adaptor
The Blue light does not
appear when the “Call
Button” (Yellow Button)
is pressed on the remote
pendant.
•
The pendant
battery is flat.
•
Faulty Pendant
•
Replace the battery.
•
Replace the pendant
The Smart Dialler is not
responding when the
“Call Button” or
“Emergency Buttons”
are pressed on the
remote pendant.
•
Flat battery in the
remote pendant
•
The “FUNCTION”
switch is not on
“Alarm” or “Mute”
position.
•
The pendant is not
paired to the
dialler.
•
The cordless
phone is too close
to the dialler.
•
Faulty Pendant
•
Replace the battery.
•
Set the “FUNCTION” switch
to “Alarm” or “Mute”.
•
Follow the Instructions to
pair the pendant and
dialler found on page 10
•
Separate the cordless
phone and Smart Dialler
by a greater distance
especially if the cordless
phone is a higher powered
type
•
Replace Pendant
The range of the
pendant to the dialler is
extremely poor.
(CareAlert have an
aerial booster to give
greater range. For
information and costing
of this product please
call 1300 75 85 95)
•
Antenna is not in
upright position.
•
Main unit is placed
close to electronic
devices such as
computer, TV,
radio, etc.
•
Main unit is placed
on the floor or at
the corner of a
building.
•
The battery of the
remote pendant is
flat.
•
Place the antenna upright
position.
•
Place the main unit away
from the electronic
devices.
•
Place the main unit in an
open environment.
•
Replace the battery.
