27
26
3 Parallel bars of
light have appeared
on the LED display
window on the top of
the Smart Dialler
•
You have
recently
activated the
Smart Dialler
either In testing
or for actual use.
•
Tap the button where
the LED light appears or
press the yellow button
on the pendant and it
will restore the LED to
clockwise single stroke
motion
My necklace cord
will not stay in the
pendant
•
The internal
spring clip is not
in the Pendant
and may have
fallen out whilst
pendant was
open
•
Contact CareAlert on
1300 75 85 95
Help message
commences to play
before the person
called answers the
phone.
•
This is by design
•
Read page 8 for reason
for this
Having difficulty
getting voice
message onto the
Smart dialler even
though the
programming of
numbers was
successful
•
There may be
interference
'noise'
blocking
the 'star (*) 6'
signal
Carry out steps EXACTLY :
1. Turn power off to the
dialler
2. Remove the cable from
'line'
at rear of dialler
3. Undo underneath cover
plate and remove battery
4. Wait for 10 seconds
5. Turn mains power on
ONLY
6. Reprogram with phone
7. Reconnect 'line' and refit
battery
My Wall Phone cable
is too short to reach
back to the CareAlert
•
This is common.
•
purchase a cable from
carealert.com.au
