5. With the Smart Dialler in the standby mode (‘Mute’ or ‘Alarm’ setting), it is
advisable to wear your Wireless pendant at all times while in and around
your home, so that in case of an emergency, it can easily be activated. You
can also activate your Smart Dialler by holding down the LED indicator
button on the top of the dialler for two seconds.
DO NOT USE EXCESSIVE
FORCE WHEN PRESSING THE BUTTON.
TESTING YOUR SMART DIALLER
Now that you have programmed and stored the contact phone numbers
into the Dialler and also recorded the voice message, it is time to put
your Smart Dialler into its ready or standby mode.
PLEASE NOTE: You can set your Dialler to either a “Mute” setting or an
“Alarm” setting. On the mute setting the Dialler will remain silent when
it dials out after being activated. This setting is for security applications
(eg shop, office etc...). On the alarm setting the Dialler will play a voice
message saying “This is an emergency situation” and then emit a loud
audible alarm for 10 seconds before dialing out to the stored numbers.
It is generally recommended that you set your function switch to the
“Alarm” setting so that when heard you have confidence, knowing
that your dialler is performing its operation to seek assistance.
1. After storing your desired contact phone numbers and recording your
message, you will need to set the “Function” switch on the rear of the
Smart Dialler to either “Mute” or “Alarm” See the above information as to
which setting you would like to use.
2. Once the Smart Dialler is in the standby mode you will notice that the
display in the indication window will have a clockwise moving digit. This
is indicating that the Dialler is now in the “Standby” mode.
3. While it is in this mode, you can still make the Smart Dialler chime loudly
by pushing the yellow button for one second on your Wireless pendant.
This may be used by a convalescing patient needing assistance from
someone who is within hearing distance of this audible chiming sound.
4. You can test your Dialler by unplugging the “Line” phone cord and then
activate your Wireless pendant by pressing the two red buttons for 1
second simultaneously. You can then watch the indication window as the
Dialler progresses through its dialing process. Please note that with the
“Line” cord unplugged, no phone numbers will actually be called. You can
test the Dialler with the “Line” cord plugged in, however you will need
to ensure that the receivers of the calls are aware that this test is being
performed.
We strongly recommend that you perform a LIVE test for at least the
first number programmed. However ensure that this is NOT “000”
Emergency Services.
13
12
For your convenience you can find this Quick
Guide on the base of your product box.
