background image

3

How it works + Disclaimer

congratulations. 

You have purchased a high quality Smart Dialler, which is easy to program. 

This device has been designed to provide you with peace of mind, with the flexibility of having 
your system 

monitored or non-monitored

. Using your existing NBN / landline plus 

the Mobile network, the Smart Dialler, when activated in non-monitored mode, will dial up to 5 
self-programmed phone numbers of your choice. If a call is not answered, then the Smart Dialler 
will sequentially move onto dialling the next number until all 5 numbers have been called (or 
the call is answered). In the unlikely event that no numbers are answered, the Smart Dialler will 
repeat this sequence once more. If a call is answered, the receiver will hear your pre-recorded voice 
message requesting assistance. The Smart Dialler is programmed to discern that the call is being 
answered live and not by a answering service. The Smart Dialler is activated by a Wireless waterproof 
pendant that can be worn around your neck or on your wrist. It can also be worn in the shower.  

in non-monitored mode

, the Smart Dialler has no ongoing monitoring costs associated with 

it and simply by-passes the monitoring station and calls direct to those relatives, friends, carers, 
neighbours, and the Triple Zero Services “000” who can then attend to your needs (a small annual 
service fee is applicable on a sim card provided by CareAlert). If you choose to have your Smart Dialler 
monitored, then your emergency calls will be answered by a 24/7 monitoring station who will take 
the necessary pre-arranged steps to ensure a quick emergency response.

Under no circumstances should this Smart Dialler be solely relied upon if you have a life-
threatening illness. Using this Smart Dialler completely indemnifies the manufacturer and / 
or its selling agents and installers from any legal action for whatever reason.

 

Your smart Dialler Pack includes the following 10 items; 

1.  One Smart Dialler – (with/without sim card) 
2.   One Wireless push button pendant with a fitted battery 
3.   One telephone cord  
4.   One AC/DC power supply 
5.   One 6 Volt rechargeable battery. 
6.   One stainless steel neck band plus one wrist band.
7.   One Operation & Instruction Manual 
8.   Small Screwdriver. 
9.   Ten page notification pad. 
10.  One white antenna

Summary of Contents for CA-0417





































Reviews: