5
mobile signal:
BlUe:
Strong Signal
PUrPle:
Medium Signal
reD:
Low Signal
FlasHinG:
Searching for Signal
nBn/landline indicator:
Blue: Landline/NBN detected
Red: Landline/NBN not detected
It is important to note that some phones, including older-style phones, may not be
suitable to program the Smart Dialler. If you are having difficulty programming your
Smart Dialler, please try using another phone. This problem is rare but you need to be
aware of this matter before assuming there is any fault with the Smart Dialler.
a remote programming installation service is available for a small fee – call 1300 75 85 95
* A red LED light on your Mobile Strength Indicator - means a poor Mobile Signal
and may not always guarantee your unit will be able to dial out.
names anD FUnction oF eacH Part
Antenna
Speaker
LED indicator window and
emergency call button. Hold
down for 2 seconds and tap to cancel.
Power
Battery Indicator
Mobile Signal
Strength Indicator*
Landline/NBN
Indicator
Remote Programming
(Tech Use Only)
Optional
Strobe/Alarm Port
DC Power
Incoming
Telecom Port
(Landline/NBN)
Outgoing
Telephone Port
Power indicator:
BlUe:
240v Power connected
oFF
: No power detected
Battery indicator:
BlUe:
High Charge Capacity
reD:
Low Charge Capacity
