Additional Information
!
181
Some
1
photos could not be deleted
- Protected photos (
1
) cannot be deleted. Remove the protection (
"
115).
Some scenes could not be added to the playlist.
- You may not be able to add to the playlist scenes recorded using another device.
- The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded in
MXP or FXP mode, the maximum number of scenes in the playlist may be less than 999.
Delete some scenes from the playlist (
"
95).
!
Some scenes could not be converted
- Among the scenes selected for conversion to SD there are scenes recorded with another
device using 24p frame rate. When converting scenes to SD, leave out scenes recorded using
another device.
Some scenes could not be deleted
- Movies that were protected/edited with other devices cannot be deleted with this camcorder.
!
Some scenes were recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
Task in progress. Do not disconnect the power source.
- The camcorder is updating the memory. Wait until the operation ends and do not disconnect
the compact power adapter or remove the battery pack.
The camcorder is set to photo mode
- You pressed
#
while recording photos (
mode). Set the camcorder to
or
mode to record movies.
The lens cover is not fully open. Turn the camcorder off, then on again.
- The lens cover did not open fully. Turn the camcorder off, then on again. If this does not solve
the problem, consult a Canon Service Center.
This memory card contains scenes. Delete all scenes to use relay recording.
- Save your movies (
"
128) if necessary, and delete all the movies from the memory card
(
"
56).
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or
edited on a computer.
This
1
photo could not be deleted
- Protected photos (
1
) cannot be deleted. Remove the protection (
"
115).
This scene was recorded using another device and cannot be added to the playlist.
- Scenes that were not recorded with this camcorder cannot be added to the playlist.
!
This scene was recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
!"
#$
182
!
Additional Information
To record video on this memory card, it is recommended to use only the XP+/SP/LP recording
modes
- Movies may not be recorded correctly on this memory card if the recording mode is set to
MXP or FXP mode (
"
59).
To use this function change the camcorder's mode from
:
to
!
- You pressed a button that cannot be used in
mode. Set the mode switch to
!
to set
the camcorder to flexible recording mode.
Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
on the memory card to fewer than 2,500 photos (printers, Windows computers), or 1,000
photos (Macintosh computers).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
!
Total play time is too long
- The playlist cannot be converted when its total playback time exceeds 2 hours and 30 min-
utes. Reduce the number of scenes in the playlist.
Unable to recognize the data
- You transferred data to the camcorder recorded in a different television system (PAL or
SECAM). Play back the recordings with the device originally used to record them.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (
"
128) and initialize the memory
using the [Complete Initialization] option (
"
40).
Messages Related to the Optional DW100 DVD Burner
If an error message appears while the camcorder is connected to the
optional DW-100 DVD Burner, refer to the following section and also to
the instruction manual of the DVD Burner.
Cannot read the disc. Check the disc.
- During disc recording mode, this message can appear when a commercially available DVD
disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted.
Replace with a brand new disc.
- During disc playback mode, this message can appear when a commercially available DVD
disc or a brand new DVD disc is inserted. Replace with an AVCHD disc created with the DVD
Burner.
Close the memory card slot cover
- The memory card slot cover is open. Close the cover after correctly inserting the memory card
(
"
38).
!"
#$
Additional Information
!
183
Connect the compact power adapter
- The camcorder is being powered by the battery pack. Connect the compact power adapter to
the camcorder.
Disc access failure. Check the disc.
- There was an error when reading the disc or attempting to write onto it.
- This message can appear also if condensation has formed (
"
191). Wait until the DVD
burner dries completely before resuming use.
- The disc may be dirty or not correctly loaded. Try removing the disc and reinserting it after
cleaning the recording surface with a clean, soft cloth. If the problem persists, replace with a
different disc.
Error reading the data
- Check that the USB cable was not accidentally disconnected.
No disc
- Insert a disc into the DVD Burner.
- This message can appear also if condensation has formed (
"
191). Wait until the DVD
burner dries completely before resuming use.
No photos
- There are no photos to add to the disc.
No scenes
- There are no scenes to add to the disc.
No scenes left to add
- There are no scenes that have not already been added to discs created previously.
Operation canceled
- The USB cable was disconnected and the operation was canceled. Check the USB connection.
- The scenes selected to be written on the disc include scenes recorded in MXP mode. Add to
the playlist in advance only those scenes recorded in other recording modes and create the
disc from the [Playlist] index screen.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (
"
128) and initialize the memory
using the [Complete Initialization] option (
"
40).
Direct Print Related Messages
Data transfer error
- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable.
- You attempted to print from a memory card that contains a large number of photos. Reduce
the number of photos.
!"
#$
184
!
Additional Information
File error
- You attempted to print a photo that was recorded with another camcorder, has a different
compression, or was edited on a computer.
Hardware error
- Cancel printing. Turn off the printer and turn it back on.
- Check the printer status.
- Ink tank errors have occurred. Replace the ink tank.
Ink absorber full
- Touch [Continue] to resume printing. Consult a Canon Service Center (refer to the list included
with the printer) to replace the ink absorber.
Ink error
- The ink level cannot be detected correctly or the ink cartridge is out of ink. Replace the ink
cartridge.
Low ink level
- The ink cartridge needs to be replaced soon. Touch [Continue] to restart printing.
No ink
- The ink cartridge is not inserted or is out of ink. Replace the ink cartridge.
No paper
- Paper is not correctly inserted or there is no paper.
Paper error
- There is a problem with the paper. The paper is not correctly loaded or the paper size is
wrong.
- If the paper output tray is closed, open it to print.
Paper jam
- The paper jammed during printing. Touch [Stop] to cancel printing. After removing the paper,
set some paper again and retry printing.
Paper lever error
- Paper lever error occurred. Adjust the paper selection lever to the proper position.
Print head not installed
- No print head is installed in the printer or the print head is defective.
Printer cover open
- Close the printer cover securely.
Printer error
- A malfunction has occurred that may require repairs. (Canon PIXMA printers: the printer's
green power lamp and orange error lamp flash alternately.)
- Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the
power outlet and contact the appropriate customer support center or service center.
!"
#$
